- First assume the axis is perpendicular to that plane.
- Draw the projection in simple position
- Top view first if the axis is perpendicular to HP
- Front view first if the axis is perpendicular to VP
- Top view first if the axis is perpendicular to HP
- Change position of the view to the given inclination
- Tilt the front view, if the axis inclined to the HP
- Tilt the top view, if the axis inclined to the VP
- Tilt the front view, if the axis inclined to the HP
- Project from this view to get the final view
- Project from the front view, to get the top view if the axis inclined to the HP
- Project from the top view, to get the front view if the axis inclined to the VP
- Project from the front view, to get the top view if the axis inclined to the HP
- Ensure all the points are named in an appropriate manner
- Lower case letters with a (‘)dash for the front views
- Lower case letters alone for the top views
Happy Drawing
Picture Courtesy:http://www.bbc.co.uk/schools/ks3bitesize/maths/shape_and_space/images/solids.gif
Engineering Graphics 
This is sarath, i was very afraid of this drawing subject.but now i am average in this subject and i want to know some techniques on the above solids like cone, cube, etc.
with respect to
sarath chandra.
thank u for all the tipd u hav provided for engg drawing….now i could imagine better than earlier
i was searching for easy points to understand this chapter.i glad that icould get it here.I am looking for some solved exersizes on this chapter.
your explanation is not clear
its very useful to me .thanks to this
Dear sir,
I saw ur explanations about the midpoint problem in animated work that makes me very clear. Give some animated drawings in projection of solids &in section of solids.
give some more graphical work in projectons &
sections of solids
7
I appreciate your effort for teaching “Engineering Graphics” through web.
A correction has to be made in Step 4,sub division 2. Correct sentence would be “Project from the TOP VIEW to get FRONT VIEW if the axis is inclined to V.P>”
Dear Sundareshwaaran,
Thank You, now I made the correction.
Please feel free to give suggestions to other posts also.
plz post some ppt files for better understanding.
I dont understand presspective projection sir.
I am having more doubts in first year engineering graphics subject.Please give me some tips from the first chapter
i am happy to say that this will help all my friends.we are expecting example drawings .thank you
Check Out this site
http://www.cognifront.com/egd_SolidsCone_hires.html
i need some help in first year engg graphics
nice tips
expecting more animated problems from sections and prjections.Please give many more tips.Thankyou
thank you for giving a notes on graphics.it is more useful for us.
hey…i want soemtips for the projections sir…..drawing is my tough subject.iam afraid of that…can u please help me?
dear sir,
i find difficult in understanding development of lateral surface i.e.old syllabus .Sir , i want to few suggestion from u to how to understand this chapter.because of this subject only i have lost my one year.so plz send me some suggestion for this sir.
Sir,
can you give me some tips for apparent angle construction in case of projection of solids
Thanks,
Abhishek
give notes on perspective view
i think that engg. graphics is not a very typical subject.its totally based on the imagination tricks & properly understanding of subject.
sir please send me some notes on section of solids with graphic representation.
could you please explain with the help of animation drawings
hiiiii……….i m a student of engg………..
now i am studying civil engineering first year
i am very afraid for EG PLEASE TELL ME THE EASIEST WAY
sir i ned help for first year engneering graphics
im facing difficulty with eng. graphics especially with projection of planes & proj. of solids could u help me
hai
hi this my subject so please give me a more information about this okkkkkkkkk
It is helpful to the engineering students to learn the basics of Engineering drawing.Students should practice the problems and it cannot be learnt just by reading/looking at the solution. understanding the Concept of different inclinations(True and appearant) is very important apart from understanding other drawing conventions likeHP,VP,reference line,projections wrt different quadrants etc
Dear students,
I would like to give some suggestions .First of all make sure that you have understood the basic concepts of the subject especially the true and appearant views and inclinations.
Consider the true inclination for the true leangth and consider appearant inclination for the appearant leangth.
If plane is in VP, then compare the length of the element of that plane which is inclined to HP with that of its true length.If both are same then angle alpha need not to be constructed.similarly
similarly,If plane is in HP, then compare the length of the element of that plane which is inclined to VP with that of its true length.If both are same then angle beta need not to be constructed.words “Appears to be” OR “In the top/front view refer to the appearant views which pertains to the appearant inclinations only.
any particular question will be answered.
sir i want two know more about projection of solid and section of solid.
its too difficult………………….
this is Ragavan. I say that this subject is one of the most easiest subjects and most of you are commenting that this subject is a difficult one!
all finger r nt same…..so dnt proud of ur self …. ….understand dear
i have some confusions in projection of solids.now i was clear about where and when the top view & front view is to be placed.thank you
sir please give some notes
what a great site and informative posts, I will add a backlink and bookmark your site. Keep up the good work!
I’m Out! 🙂
sir please send me notes on total engineering graphics subject also send me slide show presentation of all topic
plese send me the slide show presentations of all chapters
sir please send me some notes on section of solids with graphic representation.
sir please help me to know about prespectives
sir please send me some notes for projection of solids and section of solids with ppt presentation…
sir ilike graphics very much please send model questions &answers to me
A tetrahedron 70mm edges is resting on one of its corners on hp with an edge passing through tha point makes 30 degree with hp.a face containing that corner inclined 60 degree to vp. Draw the projection. Plz solve dis
this website is helping me alot making subject very easy thank u sir
Sir, plz send me some notes on sections of solids and isometric projection.
graphics is very difficult for me.so piz give some tips about it
send me some notes for the projection of straight lines
the projection of solid is based on Axis but it is easy to start with true shape of the base either in HP or VP.directly related to the inclination of the Axis.
1, Draw the true shape of the base in HP or in VP
and project the corners for other view get view as length of axis.
2, then tilt the figure according to the inclination (first inclination will be shown with that REF. Plane in which the true shape has been drawn) and get change in other view by joining the same locus and projectors.
3Then show other inclination (if it is given) and again get the change in other view.
*Front view is titled to show inclination with HP
* Top view is titled to show inclination with VP
thanks
i hope it may help who has the problem in projection of solid.
sir ,i have confusion to under stand problem on plane.
Que.- draw the projection of plane ABCD which resting on one of its corner on H.P. the diagonal AD is inclined to h.p at 30 degree. the diagonal BD is inclined to v.p at 60 degree and parallel to h.p.
pls give me some useful tips to understand dis prblem.
thank you sir, i got some easy points to remember,
thank you sir, i got some easy points to remember
sir plz send me some notes regarding “Intersection of solids”.
how i can made engineering graphics easy?
hie this is kiran. i hav a small doubt on the solids topic if they given a triangular prism then the question is that the prism is rests on the horizontal plane and one of its rectangular side is parallel to vertical plane. then what is the front view, top view and side view of that prism.
plz plz plz send me the answer to my email id: saithegreat2020@gmail.com
engg graphics is the easiest subect wen compared practically…. what u need to do is
* learn basics
* read question twice and try to understand the figure …no one needs to say u tips, u alone can creat ur own tips….just understand the the logic in the subject
*finally….dont fell this subject as a burden……. try tolike it….
DEAR SIR
I FEEL ENGG GRAPHICS IS VERY TOUGH PLEASE GIVE TIPS FOR ME.
sir i want to know that (hp,vp,rest on hp,rest on vp,lies on hp,lies on vp) all these where it will come above the line xy or below the xy
pls tell me in the form of tips
hello..i cant understand how to draw projections for points,planes and solids and also i am not able to draw neatly..can you help me
dear sir
pls pos concepts abt projection of lines………………..
Dear sir, Tell me about projection of solids.
please sent me the basic positions of the various solids when resting and inclined to hp and vp
sir..i have doubt in projection of points.. i.e.. below hp & behind vp
How to Draw this problem? A cone 40mm base and axis 50mm long touches vp on a point of its base circle .the axis is inclined at 30 degree to vp .draw its front view,top view and slide view.
Pingback: 2010 in review | Engineering Graphics
Drawing is sooooo cooooooooooool
Hello all & d maker of it..
First i was also afraid mns thinking dat how z d engg.drawind or graphics…i too woory about it…,all our classmate said dat e.d. Z hard or killer subject…but when i started seeind module or other tips ,,i jst feel comfort about it..nw i m good in my concept
dear sir,
pls give me tips that i am perfect in engg drawing.
pl send me the tips for projection of solids
good effort.but try to improve it more.
engineering graphics wants description with drawing.
it is very clear, understable & useful tricks for engg. student…
thanks for guidence…….
Earlier, It Seemed Very Tough To Understand This Subject But After This Very Simple Explanation, Am Feeling Very Confident For My Engineering Drawing Exam This November…Thanks For The Guidance…!!! 🙂 I Will Surely Get Back To Reply After My Results…!!!
its not helpful
first i was making a mess of projection but now it seems to be easier
YOU DONT KNOW ANYTHING
please give me some tips for section of solids
please send me some notes for section of solids
Its not much usefull…..as the pupils had commented !
V need more solved examples…=o..O
IT IS USELESS INFORMATION WITHOUT KNOWING THE BASICS OF ORTHOGRAPHIC PROJECTIONS HOW CAN STUDENTS DIRECTLY JUMP ON TO DIFFICULT PROBLEMS.SIR INSTEAD OF GIVING SUCH USELESS TIPS YOU COULD HAVE TOLD US SOME BASICS ABOUT IT WHICH WOULD HAVE BEEN EVEN MORE USEFULL THQAN THIS.I AM SAYING THI BECAUSE I AM AM EG STUDENT FROM THE LAST THREE YRS(2 YRS IN 11TH & 12TH).PLEASEEEEEEEEEE………………………………………SIR?
engineering drawing is a that type of graphical representation which shows any parts/component’s enternar or external details with accurate dimensions
i will die if eg comes in second yr
it’s superb what u explained
i want to know making a data of question
how to read mechanical engineerig drawing i do not understand projection please help me with audio visual [video]
You have done good job but this is already clear to me
sir i have a problem , draw a semicircle of radius80mm. this represent the development of cone. In scribe in it the largest posible circle asuming this circle as mark made on the development. Draw three view of the cone showing circle marked on veiws.
thank u sir
not fair
i cant understand projections of lines so pls make me dat easy
are koi shrt trick do jisse question ftaft solve ho ..
I don’t know hindi (is it hindi?)pl. ask your query in english
thanks for giving tips
it was very useful to revice before going to exam
we need number of examples..to understand…..:D:D:D:D:D
can u please give me more information about this subject?
Sir i want to know how we will keep the solid or plane in the initial ( in very first step), can we keep it in any style or some standard procedure are there.
Sir plz help me i m very upsat and confused about the initial keeping of the solid or plane and sir plz post few useful example
Glad to see it….:)
explained very good! I think I should solve some example. on paper…
It is very useful tips and I know how to draw the projection of solid
it will be very usefu and clearly understandable if u give the explanation in ppt’s
sir i have a problem , draw a semicircle of radius80mm. this represent the development of cone. In scribe in it the largest posible circle asuming this circle as mark made on the development. Draw three view of the cone showing circle marked on veiws.
engineering graphics is a very simple subject if u understand the basic techniques
engineering graph paper only practic and imagenation covering explanied good understanding i can solv only question paper. a understanding by akshaysing
Front view and top view are same which solid?give me ans.
A diagonally cut cuboid will have a same front and top view.(ofcourse the triangular surface should be such that it is perpendicular to both hp and vp)
Thank u.
this s brindha projection of solids and the tips given by you is very useful to me to understand
very usefull tips…!
Thank you.
Sir,along with tips show some solved sums as an example that will be more usefull in understanding concept easily because everyone is feeling tough in this subject please show some example sir
I feel critical
THIS IS A BLESSING FOR ENGINEERING STUDENTS.PLEASE TELL ME WHAT IS THE METHOD FOR FINDING APPARENT ANGLE IN PROJECTION OF PLANES?
Can sum1 tel me when to construct locus in projection of solids in detail?
Need d answr urgently.
Plzz reply nybody asap who knws d answr.
Thanks for the tips given. I need some more tips about this topic to understand the question
I want to know how to start the simple position and the second position
after studying the question. Kindly explain me
Narasimhan
Engineering graphics in projection of solids chapter after reading the question how to start the simple position front and top view then second position top and front view, kindly explain
fine
Thank u..nice tips
the concept of engineering graphics is made easy and it is useful for anna university exams.
I need some more tips about this topics. it is easy way to projection of solid planes and give a some more tips along the topics
pictorial representation and videos were really useful
thank u so much sir . the topics were very easy to understand and very informative.
and the topics of section of solids, projection of solids , isometric view is a vast topic and was very tough to understand for me ,by using these notes it made me very comfortable to go through and made me confident over these concepts. and i am happy over these tips.
I need some more tips about the topics, Its give a some easy way to understanding the projection of solid planes, if give a some pictures easy to understand
Sir.. recently I got very less marks in drawing…. Because I got confused in the projections .. I’m not afraid of it… But I want some simple tips to understand projections easily…. Please help me in this regard…
Sir… I am very bad at projections……. Please give some simple tips to understand projections easily